EN10028-2 Alloy Steel Plate P265GH|P355GH|16Mo3

About EN 10028-2 Steel Plate

Thickness:6mm-80mm
Length: 6000mm~15000mm or as required
Width: 1800mm-3220mm
Application: Oil tank steel plate, High pressure boiler plate, Pressure vessel steel plate
Supplementary Technology: hot rolled, controlled rolling, normalizing, annealed tempering, normalizing+ tempering, hardening + tempering, HIC, SSC, SPWHT, Third Party Test.
Surface: Coated or Shot Blasting and Painting.
Delivery state: Hot Rolled, Cold Rolled
Steel Grade: P265GH, P295GH, P355GH, 16Mo3, 10CrMo9-10

Product Scope：

Steel plate product available by EN10028-2 standard includes 5 steel grades: P265GH, P295GH, P355GH, 16Mo3, 10CrMo9-10. EN 10028-2 is the European standard that specifies requirements for steel plate and sheet products for pressure equipment made of weld-able non-alloy and alloy steels with elevated temperature properties as specified. ANSON is an experienced boiler and pressure steel plate supplier which can offer you EN10028-2 steel plate of all grade and dimension range.

EN 10028-2 Chemical Composition:

Steel Grade	Number	C	Si	Mn	Pmax	Smax	Al_total	N	Cr	Cu^b	Mo	Nb	Ni	Ti	V	Others
P235GH	1.0345	≤0.16	≤0.35	0.60^cto1.20	0.025	0.015	≤0.020	≤0.012^d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02	Cr+Cu+Mo+Ni: ≤0.70
P265GH	1.0425	≤0.20	≤0.40	0.80^cto1.40	0.025	0.015	≤0.020	≤0.012^d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02
P295GH	1.0481	0.08 to 0.20	≤0.40	0.90^cto1.50	0.025	0.015	≤0.020	≤0.012^d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02
P355GH	1.0473	0.10 to 0.22	≤0.40	1.10to1.70	0.025	0.015	≤0.020	≤0.012^d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02
16Mo3	1.5415	0.12 to 0.20	≤0.35	0.40to0.90	0.025	0.010	e	≤0.012	≤0.30	≤0.30	0.25to0.35	-	≤0.30	-	-	-
18MnMo4-5	1.5414	≤0.20	≤0.40	0.90to1.50	0.015	0.005	e	≤0.012	≤0.30	≤0.30	0.45to0.60	-	≤0.30	-	-	-
20MnMoNi4-5	1.6311	0.15to 0.23	≤0.40	1.00to1.50	0.020	0.010	e	≤0.012	≤0.20	≤0.20	0.45to0.60	-	0.40to0.80	-	≤0.02	-
15NiCuMoNb5-6-4	1.6368	≤0.17	0.25to0.50	0.80to1.20	0.025	0.010	≤0.015	≤0.020	≤0.30	0.50to0.80	0.25to0.50	0.015to0.045	1.00to1.30	-	-	-
13CrMo4-5	1.7335	0.08to 0.18	≤0.35	0.40to1.00	0.025	0.010	e	≤0.012	0.70^fto1.15	≤0.30	0.40to0.60	-	-	-	-	-
13CrMoSi5-5	1.7336	≤0.17	0.50to0.80	0.40to0.65	0.015	0.005	e	≤0.012	1.00to1.50	≤0.30	0.45to0.65	-	≤0.30	-	-	-
10CrMo9-10	1.7380	0.08to0.14^g	≤0.50	0.40to0.80	0.020	0.010	e	≤0.012	2.00to2.50	≤0.30	0.90to1.10	-	-	-	-	-
12CrMo9-10	1.7375	0.10 to 0.15	≤0.30	0.30to0.80	0.015	0.010	0.010To0.040	≤0.012	2.00to2.50	≤0.25	0.90to1.10	-	≤0.30	-	-	-
X12CrMo5	1.7362	0.10 to 0.15	≤0.50	0.30to0.60	0.020	0.005	e	≤0.012	4.00to6.00	≤0.30	0.45to0.65	-	≤0.30	-	-	-
13CrMoV9-10	1.7703	0.11 to 0.15	≤0.10	0.30to0.60	0.015	0.005	e	≤0.012	2.00to2.50	≤0.20	0.90to1.10	≤0.07	≤0.25	0.03	0.25to0.35	≤0.002B≤0.015Ca
12CrMoV12-10	1.7767	0.10 to 0.15	≤0.15	0.30to0.60	0.015	0.005	e	≤0.012	2.75to3.25	≤0.25	0.90to1.10	≤0.07^h	≤0.25	0.03^h	0.20to0.30	≤0.003B^h≤0.015Ca^h
X10CrMoVNb9-1	1.4903	0.08 to 0.12	≤0.50	0.30to0.60	0.020	0.005	≤0.040	0.030to0.070	8.00to9.50	≤0.30	0.85to1.05	0.06to0.10	≤0.30	-	0.18to0.25	-

EN 10028-2 Mechanical Property

Steel Grade		Delivery State	Thickness mm	Yield Strength Mpa≥	Tensile Strength Mpa	Elongation %≥	Minimum Impact Power of Temperature
name	number	Delivery State	Thickness mm	Yield Strength Mpa≥	Tensile Strength Mpa	Elongation %≥	-20	0	+20
P235GH	1.0345	+N^d	≤16	235	360～480	24	27	34	40
			16＜t≤40	225
			40＜t≤60	215
			60＜t≤100	200
			100＜t≤150	185	350～480
			150＜t≤250	170	340～480
P265GH	1.0425	+N^d	≤16	265	410～530	22	27	34	40
			16＜t≤40	255
			40＜t≤60	245
			60＜t≤100	215
			100＜t≤150	200	400～530
			150＜t≤250	185	390～530
P295GH	1.0481	+N^d	≤16	295	460～580	21	27	34	40
			16＜t≤40	290
			40＜t≤60	285
			60＜t≤100	260
			100＜t≤150	235	440～570
			150＜t≤250	220	430～570
P355GH	1.0473	+N^d	≤16	355	510～650	20	27	34	40
			16＜t≤40	345
			40＜t≤60	335
			60＜t≤100	315	490～630
			100＜t≤150	295	480～630
			150＜t≤250	280	470～630
16Mo3	1.5415	+N^e	≤16	275	440～590	22	f	f	31
			16＜t≤40	270
			40＜t≤60	260
			60＜t≤100	240	430～560
			100＜t≤150	220	420～570
			150＜t≤250	210	410～570
18MnMo4-5	1.5414	+NT	≤60	345	510～650	20	27	34	40
		+NT	60＜t≤150	325	510～650
		+QT	150＜t≤250	310	480～620
20MnMoNi4-5	1.6311	+QT	≤40	470	590～750	18	27	40	50
			40＜t≤60	460	590～730
			60＜t≤100	450	570～710
			100＜t≤150	440	570～710
			150＜t≤250	400	560～700
15NiCuMoNb5-6-4	1.6368	+NT	≤40	460	610～780	16	27	34	40
			40＜t≤60	440	610～780
			60＜t≤100	430	600～760
		+Ntor+QT	100＜t≤150	420	590～740
		+QT	150＜t≤200	410	580～740

EN 10028-2 Equivalent Steel Grade:

Material	EN 10028-2	DIN 17155	NFA 36-205	UNI 5869	BS 1501	UNE 36087	ASTM	JIS G3115
1.0345	P235GH	HI	A37CP	Fe360-1KW	161 Gr. 360/ 164 Gr. 360	A37 RCI	A285 Gr.C- A 414 Gr.C/ A516 Gr. 55	SPV24
1.0425	P265GH	HII	A4 CP	Fe410-1KW	161 Gr.400/ 164 Gr. 400/ 224 Gr. 400	A42 RCI	A414 Gr.E / A516 Gr. 60
1.0481	P295GH	17Mn4	A48CP	A48CP	224Gr.490	A47 RCI	A414 Gr.F / A 516 Gr. 65	SPV32
1.0473	P355GH	19Mn6	A52CP	Fe510-1KW		A52 RCI	A414 Gr.G	SPV36
1.5415	16Mo3	15Mo3	15D3	15Mo3	1503 - 243 B	16Mo 3	A204 Gr.B
1.7335	13CrMo4-5	13CrMo44	15CD4-05	14CrMo4.5	620 Gr.27	14 CrMo 4.5	A387 Gr. 12
1.738	10CrMo9-10	10CrMo910	10CD9.10		622 Gr.31		A387 Gr. 22
1.7383	11CrMo9-10			12CrMO 9.10		12 CrMo 9.10

ANSON can supply EN10028-2 steel plates from stock or from reputed steel mills. We also offer steel fabrication service where steel plates can go through processings like cutting (any size and any shape), drilling, welding, milling, machining as you require. If you are interested in buying EN10028-2 steel plate products, contact us now for the latest price or check the following table for equivalent steel grade of EN10028-2.

Get In Touch With

We receive enquiries in English, Español (Spanish), Русский язык (Russian), Français (French) and العربية (Arabic). Our professional team will reply to you within one business day. Please feel free to contact us!